Excavator Wedgelock Grading Bucket - Model BTT 210 (1.25 yd) - $4,500 (Roseville)

Excavator Wedgelock Grading Bucket - Model BTT 210 (1.25 yd) 1

Excavator Wedgelock Grading Bucket - Model BTT 210 (1.25 yd) 1 thumbnail

condition: good

make / manufacturer: Wedgelock

model name / number: BTT 210

QR Code Link to This Post

This is a 7-14-2006 build Wedgelock Model BTT 210 1800.1 grading bucket that came with our CAT 229 excavator, and is being ofered for sale as surplus to our needs. All hydraulics look good to excellent, overall condition is good, and appears to have minimal cutting edge war and low hours on it. It uses the WedgeLock quick-release system on our excavator, but the hydraulics on our machine have also been converted over to operate the Wagmann thumb currently in use.

It is presently located on our property outside Colfax, California, but can be moved down to the Sacramento/Roseville area if more convenient to interested parties. Weight is 2267 lbs (according to the data plate), length - 70.5", width - 32", depth - 26", for an estimated capacity of 1.25 cbic yards. Note that the smaller bucket shown IS NOT INCLUDED!

The Wedgelock BTT 210 is a hydraulic quick coupler (or hitch) designed for excavators in the 18.1 to 23.5 tonne weight class. The relevant dimensions for the coupler itself (which determine which buckets will fit) are:
Pin Diameter: 3"
Pin Centers: ~19"
Link Width: 280 mm
These dimensions refer to the pickup points of the pins that attach to the bucket's hangars.

Reply to this post if interested, or have additional questions. Thanks, -Tom

post id: 7892726110

posted: 2025-11-01 08:55

updated: 2025-11-16 08:42

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.

Excavator Wedgelock Grading Bucket - Model BTT 210 (1.25 yd) - heavy...

This is a 7-14-2006 build Wedgelock Model BTT 210 1800.1 grading bucket that came with our CAT 229 excavator, and is being ofered for sale as surplus to our needs. All hydraulics look good to...