Chevrolet Corvair (4) 13” Rims (2) Sets of Hubcap’s - $300 (Sacramento)
‹image 1 of 6›
Land Park near Sutterville Rd
QR Code Link to This Post
1966 Corvair 13" 5-lug OEM Steel Rims set of (4), two sets of hubcaps, (1) set of (4) dogdish, (1) set of (4) Monza full wheel cover as shown in picture. Text (91six- six 7 zero - nine 1four 8
$300.00 obo
**Understanding 1966 Chevy Corvair 13" Wheels and Potential Compatibility
To determine which other vehicles might share wheels compatible with your 1966 Chevy Corvair 13" wheels, it's crucial to understand the wheel's specifications, primarily its bolt pattern.
Based on information from Corvair enthusiasts and parts sources, your 1966 Corvair wheels likely have a 5x4.75" (5x120.65mm) bolt pattern.
Here's a breakdown of potential compatibility:
1. Late Model Corvairs (1965-1969):
The bolt pattern for late model Corvairs is a 5-lug with a 4 3/4" bolt circle diameter (5x4.75").
Therefore, other late model Corvairs (1965-1969), including Corsas and convertibles, would share this same bolt pattern.
2. Other Classic Chevrolets:
This 5x4.75" bolt pattern was used on a wide range of Chevrolet cars from 1949 and continued through the muscle car era.
Examples include Chevy Fleetline, Styleline, Tri-Five era cars, muscle cars, and Corvettes.
Note that wheel width and backspacing may differ, so testing for proper fitment is crucial.
3. Other General Motors (GM) Brands:
Buick, Pontiac, and Oldsmobile muscle cars also used the 5x4.75" pattern.
Later GM models used a metric pattern (5x120mm), which, due to a small variance, may also be compatible with classic Chevys.
Important considerations for wheel swapping:
Backspacing and Offset: These measurements determine how far in or out a wheel sits. Backspacing can vary between different models even with the same bolt pattern.
Clearance: Ensure the wheels and tires have adequate clearance from brake components, suspension, and fenders through the full range of steering and suspension travel.
Tire Size: When changing wheel diameter, adjust tire size to maintain a similar overall circumference for speedometer accuracy and to avoid potential issues with transmission or driveline components.
Test Fitment: It's always best to test fit any wheels before purchasing to ensure proper clearance and compatibility.
In conclusion, while the 1966 Corvair 13" wheels share a bolt pattern with a good number of classic Chevy and other GM vehicles, always prioritize verifying backspacing, offset, and overall clearance to ensure a safe and proper fitment.**